LightPath 质量保证

在 LightPath Technologies,我们全力以赴,将产品质量和客户满意视为我们的首要任务。 确保产品质量使我们的第一要务。 我们高度重视您的业务,我们的目标是提供价格经济、品质优良的产品 ,满足客户的技术要求和快速的市场响应。 LightPath 致力于开发、管理和实施符合ISO 9001-2008各项要求的质量管理系统。 质量和检验团队由训练有素的员工组成,他们都是所在领域的专家。
LightPath Technologies分别自于2001 年 8 月和 2006 年 8 月,被 TUV America 和 SGS 中国认证为符合 ISO 9001:2008  标准的质量管理系统。 它包括全面的文件控制系统,该系统在公司内部计算机网络上进行维护,可供整个公司的员工访问,并由专职的文控人员进行管理。 它包含 ISO 9001:2008 标准所需的所有关键特性,如:

  • 公司内部的所有标准流程包括:校准、工程、采购、管理评审、维护、纠正措施等。
  • 工厂内部执行超过 150 项单独作业指导书,其中涵盖许多具体的流程。
  • 设置独立的规范文档,控制产品性能达到不同方面的要求。
  • 工程制图(Solid Works),由专职制图员人管理。
  • 实时交互的计量和报告系统,确保质量和及时交付。

LightPath 新任团队和最终检查团队由经验丰富的员工组成,所有检察员的平均工作时间都在 5 年以上。 我们公司内建立了一系列实验室,可针对 Telcordia 和其他 MIL 标准进行可靠性测试,从而达到产品合格要求。 LightPath 是经过 ISO 9001 认证的供应商。



Reach Compliance

"REACH is a new European Community Regulation on chemicals and their safe use (EC 1907/2006). It deals with the Registration, Evaluation, Authorization and Restriction of Chemical substances. The new law entered into force on 1 June 2007."

"The aim of REACH is to improve the protection of human health and the environment through the better and earlier identification of the intrinsic properties of chemical substances. At the same time, innovative capability and competitiveness of the EU chemicals industry should be enhanced. The benefits of the REACH system will come gradually, as more and more substances are phased into REACH."


In response to the legislated environmental directives being instituted throughout the world, LightPath has established a comprehensive program that is intended to promote product compliance with the new laws. One notable directive is RoHS (Restriction of the use of certain Hazardous Substances).

The RoHS legislation restricts the use of certain hazardous substances to levels of less than 100-1000 ppm used in electronic products.
• Mercury
• Lead
• Polybrominated Biphenyls (PBB)
• Hexavalent Chromium
• Cadmium
• Polybrominated Diphenylethers (PBDE)

All LightPath RoHS compliant parts are compatible with lead-free solder processes.

Part-specific RoHS information, including a RoHS Certificate of Compliance, is available on the website. The website will continually be updated as parts become compliant and when additional RoHS information is available.

Conflict Minerals

The U.S. Securities and Exchange Commission (the “SEC”) adopted final rules to implement reporting and disclosure requirements related to “conflict minerals,” as directed by the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010. The rules require publicly traded companies to report annually to the SEC the presence of certain “conflict minerals” that are “necessary to the functionality or production” of products such reporting company manufactures or contracts to manufacture.

The definition of “conflict minerals” refers to gold, as well as tin, tantalum, and tungsten, derivatives of cassiterite, columbite-tantalite, and wolframite, originating in the Democratic Republic of the Congo or adjoining countries (“Covered Countries”).

We support these requirements to further the humanitarian goal of ending violent conflict in the Covered Countries, which has been partially financed by the exploitation and trade of “conflict minerals.”

To that end, our commitment is as follows:
• To support the aims and objectives of the U.S. legislation on the supply of “conflict minerals;”
•To not knowingly procure these “conflict minerals” from facilities originating in the Covered Countries, unless such facilities are certified as conflict free; and
• To request that our suppliers undertake reasonable due diligence with respect to their supply chains to ensure that minerals are solely sourced from mines and smelters outside of the Covered Countries or mines and smelters which have been certified by an independent third party as conflict free if sourced within the Covered Countries.

We aim to use only conflict free materials, parts and components in the products that we manufacture. If we discover that “conflict minerals” originating from the Covered Countries are used in materials, parts or components we procure, we will take appropriate actions to transition to a supplier using conflict free minerals.


LightPath will exhibit at the SHOTSHOW Supplier Showcase 2020 January 21 – 24 2020READ



LightPath will exhibit at SPIE Photonics West Booth 342 February 1 – 6 2020READ


See All »